First Response Test & Confirm Pregnancy Test 2 count

Product overview

This pregnancy tests product is from First Response and is supplied in a 2 count format.

Directions

For FIRST RESPONSE™ Early Result Pregnancy Test: • After reading the insert and when you are ready to perform the test, remove the test stick from the foil wrapper and take off the Overcap STEP 1 • Holding the test stick by the Thumb Grip with the Absorbent Tip pointing downward and the Result Window facing away from your body, place the Absorbent Tip in your urine stream for 5 seconds only. (You may also collect your urine in a clean, dry cup and immerse the entire Absorbent Tip in the urine for 5 seconds only.) STEP 2 • While still holding the stick with the Absorbent Tip facing downward, replace the Overcap and lay the stick on a flat non-absorbent surface with the Result Window facing up. • You may soon see a pink colour moving across the Result Window to indicate the test is working. • Wait 3 minutes until reading results STEP 3 • Pregnant: Two pink lines in the Result Window. One line may be lighter than the other. Appearance of the results may vary. • Not Pregnant: One pink line in the Result Window. For FIRST RESPONSE™ Digital Pregnancy Test: • After reading the insert and when you are ready to perform the test, remove the test stick from the foil wrapper and remove the Overcap. (Upon removal from the wrapper, check the Display Screen for the presence of a steady clock symbol. The device is ready for use. Do not test unless the steady clock symbol is on the Display Screen.) STEP 1 • Hold Thumb Grip so that the Absorbent Tip is pointing downward and the Display Screen is facing away from your body. • Place the Absorbent Tip in your urine stream for 5 seconds. Be careful not to get the urine on the plastic holder. During testing, never hold the device with the Absorbent Tip pointing upward. (You may also collect your urine in a clean, dry cup and immerse the entire Absorbent Tip in the urine for 5 seconds.) STEP 2 • While still holding the stick with the Absorbent Tip facing downward, replace the Overcap and lay the stick on a flat non-absorbent surface with the Display Window facing up. • The clock symbol will begin to blink in about 30 seconds after urine is applied to indicate the test is working. STEP 3 • In approximately 3 minutes, an unmistakable “YES+” or “NO-“ will appear on the Display Screen